QuickStart Procedure

This document is intended to provide a tutorial-like procedure for downloading source code and start-up data files, building the model, and executing a short default run on a 64-bit Linux system.


This document is up to date for version 1.94 of the TIEGCM

Downloading the model source code and required data files

The model source code and related input data files may be downloaded from the TIEGCM download page of the main TGCM website:


You will need to provide an email address (login and password are NOT required). Documentation and Postprocessor codes are also available on the download site, but all you need for now is the source code, and corresponding data files. Both are provided as gzipped tar files.

After downloading the two gzipped tar files to an empty working directory (workdir) on a large disk system (for example, /mydisk/tiegcm), uncompress and extract the source code and related scripts and documentation:

$ gunzip tiegcmx.xx.tar.gz
$ tar xvf tiegcmx.xx.tar

where x.xx is the model version downloaded.

Next, make a directory to hold the data files (for example, /mydisk/tiegcm/data), and uncompress and extract the data tar file into that directory. Then set environment variable $TGCMDATA, e.g., for the c-shell, add this line to your .cshrc file:

setenv TGCMDATA /mydisk/tiegcm/data

At this point, you should have something like this in your working directory /mydisk/tiegcm:

total 2376
-rw-rw-r-- 1 user tgcm    4928 Jun  1  2010 README.download
-rw-r--r-- 1 user tgcm    2886 Jun  1  2010 Release_Notes
drwxrwxr-x 2 user tgcm    4096 Apr 22 08:52 data/
-rwxrwxr-x 1 user tgcm   10137 May 31  2010 tiegcm-ibm.job*
-rwxrwxr-x 1 user tgcm   10671 May 31  2010 tiegcm-linux.job*
drwxrwxr-x 5 user tgcm    4096 Jun  1  2010 tiegcmx.xx/
-rw-r--r-- 1 user tgcm    6116 May 31  2010 tiegcmlicense.txt

These files and directories contain the following:


README.download Instructions for building and making a short default run.


Release notes for this version of the model.


Directory containing the downloaded data files (this is $TGCMDATA)


Job script for building and executing under IBM/AIX systems. (default tiegcm-ibm.job)

Read more about Running the model on IBM/AIX systems.


Job script for building and executing under Linux (64-bit) systems. (default tiegcm-linux.job)


Model root directory, containing source code, supporting scripts, and documentation.

You are now prepared to build the model and make a short default run using the job script.

Making a default run on a 64-bit Linux system

Take a look at the Linux job script tiegcm-linux.job. Near the top are several shell variables, with their default settings, which configure the job script (variables and values may vary somewhat between model versions):

set modeldir = tiegcmx.xx
set execdir  = tiegcm-linux
 set make     = Make.intel_hao64
#set make     = Make.pgi_hao64
#set input    = tiegcm.inp
set output   = tiegcm.out
set mpi      = TRUE
set nproc    = 4
set modelres = 5.0
set debug    = FALSE
set exec     = TRUE
set utildir  = $modeldir/scripts

Following are brief explanations of the job script shell variables:


Absolute or relative paths are acceptable when specifying directories. Relative paths should be relative to the working directory (workdir).


The model root directory (modeldir from the source code download). This will contain subdirectories src/, scripts/, doc/, etc.


This is the execution directory (execdir), in which the model will be built and executed. It will be created if it does not already exist. This directory will also contain the model output netCDF history files.


Make file containing platform-specific compiler flags, library locations, etc. If not otherwise specified with a path, the job script will look for this file in modeldir/scripts. This file is included in the main Makefile (scripts/Makefile). The user can either make necessary adjustments to an existing make file, or write their own for a different platform/compiler system.

Here is an example make file for 64-bit HAO Linux systems using the ifort Intel compiler: Make.intel_hao64


The namelist input file. When this is commented (as above), the job script will make a default namelist file tiegcm_default.inp, and use it for the default run. Later, you can edit this file for your own runs, rename it, and reset and uncomment the input shell variable in the job script.


Name of the file to receive stdout output from the model. If this pre-exists, it will be overwritten when the model is executed.

Here is an example stdout file from a single-processor default run: tiegcm_default.out


Logical flag indicating whether or not to link the MPI library for a multi-processor parallel run. If FALSE, the MPI library is not linked, and it is assumed the model will be run in serial (single-processor) mode.


Number of processors to use in a parallel execution. This is ignored if mpi is FALSE.

Model resolution. Two resolutions are supported:
  • modelres = 5.0 sets 5-degree lat x lon horizontal, and dz=0.50 vertical
  • modelres = 2.5 sets 2.5-degree lat x lon horizontal, and dz=0.25 vertical

If the resolution is changed, the model should be recompiled before re-executing the job script (type “gmake clean” in the execdir).

For more information, see Grid Structure and Resolution.


If debug = TRUE, the job script will compile the build with debug flags set. Debug flags specific to the compiler are set in the make file. If debug is changed, the code should be recompiled (type “gmake clean” in the execdir before re-executing the job script).


If exec = TRUE, the job script will execute the model after compilation, otherwise, the job script will stop after compilation without execution.


The utility directory containing supporting scripts. This is normally the scripts/ subdirectory in the model root directory modeldir.

You are now ready to build and execute a default run. To do this, simply execute the job script as follows:

$ tiegcm-linux.job &

The compilation output will be displayed. If the build is successful (and exec=TRUE), the model will be executed, and stdout will go to the specified output file. If the job is successful, you can edit and rename the namelist input file, reset input in the job script, and re-execute the job script. If there has been no change to the source code, it will not need to recompile, and will use the pre-existing executable.

Running the model on IBM/AIX Platforms


This section contains some information that is specific to user’s of the NCAR IBM system "bluefire". User’s of other IBM systems may need to make adjustments for their particular environment. For more information about the NCAR bluefire system, see http://www2.cisl.ucar.edu/docs/bluefire-user-guide

The model can be built and executed on IBM platforms running AIX with the xlf90 (mpxlf_r) compiler. You can use the same procedure described in the previous section, except that you use the IBM job script tiegcm-ibm.job instead of the Linux job script tiegcm-linux.job.

The IBM job script has the same user-settable shell variables as the Linux job script, but the default settings are slightly different:

set modeldir = tiegcm_trunk
set execdir  = tiegcm_trunk-aix
#set input    = tiegcm.inp
set output   = tiegcm.out
set make     = Make.bluefire
set mpi      = TRUE
set modelres = 5.0
set debug    = FALSE
set exec     = TRUE
set utildir  = $modeldir/scripts

Note the execdir name, and the make file Make.bluefire

Also note the special “#BSUB” directives at the top of the IBM job script (descriptions in the right-hand column are for this document only, and are not in the script itself):

#BSUB -J tiegcm_trunk               # Job name
#BSUB -P 24100004                   # NCAR project number
##BSUB -q regular                   # regular queue (commented here)
##BSUB -n 32                        # number of processors (commented here)
#BSUB -q debug                      # debug queue
#BSUB -n 8                          # number of processors (MPI tasks)
#BSUB -o tiegcm_trunk.%J.out        # stdout file
#BSUB -e tiegcm_trunk.%J.out        # stderr file
#BSUB -u $LOGNAME@ucar.edu          # email notification address
#BSUB -W 1:00                       # wallclock limit (6-hr max at NCAR)

These are resource settings for the Load Sharing Facility (LSF), the batch queuing system sold by Platform Computing. The LSF is used for scheduling jobs on the bluefire IBM system at NCAR. This job will be submitted to the debug queue, requesting 8 processors, with a wallclock limit of 1 hour. Note the double pound-sign “##” indicates a commented field.

To submit the IBM job script to the LSF batch system, type:

$ bsub < tiegcm-ibm.job

Watch the progress of your LSF job with the command:

$ bjobs

You can kill a LSF job with this command:

$ bkill job_ID

Where job_ID is the job identifier given in the bjobs command.

For more information about the LSF, see the Wikipedia site:


or the Platform Computing site: